MikroTik Training
Thank you for choosing SmartCS as your training partner. As a MikroTik Certified Training Centre we are confident that we can provide the expert knowledge that you need to install, manage and administer your network built using MikroTik RouterOS.
Please note that we are not owned by or affiliated with MikroTik Latvia. As with other MikroTik Partners throughout the world we provide training on the full range of MikroTik certifications.
Certified Network Associate Training Course.
Certified Routing Engineer Training Course.
Certified Wireless Engineer Training Course.
Certified Traffic Control Engineer Training Course.
Certified Internetworking Engineer Training Course.
Certified User Management Engineer Training Course.
Certified Security Engineer Training Course.
Certified Switching Engineer Training Course.
Certified Enterprise Wireless Engineer Training Course.
Training _ IT Solution
Training _ IT Solution Three aspects which are very important in any solution are INNOVATION, QUALITY and TECHNOLOGY
-
To book a course email training@smartcs.ca for an enquiry form.
-
MikroTik MTCNA – Certified Network Associate Training Course:
Firstly, MikroTik MTCNA – Certified Network Associate Training Course MikroTik MTCRE is at the 2nd level certificate from MikroTik, and it is considered in the Engineering level. Secondly,this course will speak about everything related to Routing at the Intermediate level. Being MikroTik MTCRE certified is a prerequisite for the higher level Routing certificate which is MTCINE.
For this reason, I have designed this course to help you to get a 1st insight to MikroTik and help you to understand all topics that are available on the MTCNA track to be able to be ready for the MTCNA exam.
In conclusion, this training (MTCNA) included information to dealing with MikroTik operating system (Router OS) and configuration the devices and connect it with the internet and intranet and protect the network from the external attack.
-
GET IN TOUCH:
-
Module 1 MikroTik RouterOS introduction.
-
Module 2 MikroTik RouterOS DHCP.
-
Module 3 MikroTik RouterOS Bridging.
-
Module 4 MikroTik RouterOS Routing.
-
Module 5 MikroTik RouterOS Wireless.
-
Module 6 MikroTik RouterOS Firewall.
-
Module 7 MikroTik RouterOS QoS.
-
Module 8 MikroTik RouterOS Tunnels.
-
Module 9 MikroTiK RouterOS Tools.
As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. A lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
Requirements;
-
Basic networking skills.
-
Knowledge of the TCP/IP protocol.
-
Basic computer skills knowledge on.
-
Students who want to learn and be ready for the MikroTik MTCNA exam.
Students who want to learn and be ready for the MikroTik MTCNA exam
For more information
https://i.mt.lv/cdn/training_pdf/mtcna_outline_2019181161836.pdf
-
Certified Network Associate Training Course:
As result, MikroTik MTCNA – Certified Network Associate Training Course MikroTik MTCRE is at the 2nd level certificate from MikroTik, and it is considered in the Engineering level. Aslo, This course will speak about everything related to Routing at the Intermediate level. Being MikroTik MTCRE certified is a prerequisite for the higher level Routing certificate which is MTCINE.
For this reason, we have designed this course to help you understanding how Routing happens in MikroTik and be ready for the MikroTik MTCRE exam.
Module 1 static routing. Module 2 point to point addressing. Module 3 VPN, VLAN. Module 4 OSPF. As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. Also, a lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
The MTCRE training is included the following:
-
Module 1 static routing.
-
Module 2 point to point addressing.
-
Module 3 VPN, VLAN.
-
Module 4 OSPF.
As you can see, there are many topics that are covered in this course and on each of the topics there are sub-topics. Also, a lot of LABS will be done on each of the topics so you can understand practically how you can configure all these topics on the MikroTik.
Requirements;
-
Having MikroTik MTCNA knowledge.
-
Students who want to learn and be ready for the MikroTik MTCRE exam.
-
Engineers who want to have more knowledge on Routing in MikroTik.
For more information:
https://i.mt.lv/cdn/training_pdf/mtcre_outline_2019181161836.pdf
-
MikroTik MTCWE – Certified Wireless Engineer Training Course:
For instance, Wireless has become an essence in the IT industry, we do have wireless everywhere: at home, at work, in the restaurant, in the airport …. and everywhere.
As well, MikroTik have a very reputable hardware when we speak about wireless. In addition of the WLAN, MikroTik devices works perfectly in the outdoor environment and they can be deployed for Point-to-Point and/or Point-to-Multipoint wireless networks. Unfortinatly, the only drawback is that configuring the wireless correctly on the MikroTik routers is a challenge.
For this reason, we have designed this course to be such a reference for you in case you want to deploy a wireless network using MikroTik products, or in case you want to be ready for the MikroTik MTCWE exam.
The MTCRE training is included the following:
-
Module 1 wireless installation.
-
Module 2 wireless standard.
-
Module 3 wireless tools.
-
Module 4 wireless troubleshooting.
-
Module 5 wireless advanced settings.
-
Module 6 802.11 n.
-
Module 7 wireless security.
-
Module 8 WDS and MESH.
-
Module 9 wireless bridging.
-
Module 10 Nstreme protocol.
-
Module 11 NV2 protocol.
Requirements;
-
Required to have MikroTik MTCNA knowledge
-
Have experience with MikroTik products
Wireless engineers who wish to master the wireless on MikroTik products
Students who want to prepare for the MikroTik MTCWE exam.
For more information
https://i.mt.lv/cdn/training_pdf/mtcwe_outline_2019181161836.pdf
-
MikroTik MTCTCE – Certified Traffic Control Engineer Training Course:
Firstly, How to control traffic on MikroTik? A question that is always asked by students. If you have a network then you have traffic generated and the Mikrotik Router can control the traffic the way that you want.
For example, you can create filter rules to filter the unwanted traffic passing via the router to the router itself. You can use the MikroTik firewall to block all type of attacks such as DOS, Ping flood, Syn Flood etc…
Secondly, You can also create the QOS so you can classify the bandwidth based on type of traffic they do and you can prioritize important traffic. And much more things you can do with the control of your traffic on the MikroTik Router.
In conclusion, This course will help you to be ready for the MikroTik MTCTCE exam and it will contain a lot of real LAB scenarios to explain in detail the best way to make traffic control in your network.
The MTCNA training is included the following:
-
Module 1 packet flow diagram.
-
Module 2 Firewall filter / NAT / Mangle.
-
Module 3 quality of service.
-
Module 4 DNS client / cache.
-
Module 5 DHCP server / relay / client.
-
Module 6 web proxy.
Requirements;
-
Have a minimum MTCNA knowledge.
-
Be familiar with the TCP/IP protol and the OSI model.
-
Have a basic experience with MikroTik .
Who is the target audience?
Students who want to prepare for the MikroTik MTCTCE exam.
Engineers who would like to implement traffic control in their network.
Engineers who want to understand how packet flow works on MikroTik.
Engineers who want to deploy Firewall using MikroTik Router.
Engineers who want to deploy QOS on Mikrotik .
For more information
https://i.mt.lv/cdn/training_pdf/mtctce_outline_2020154113204.pdf
-
MikroTik MTCTCE – Certified Traffic Control Engineer Training Course:
-
MikroTik MTCINE is the hardest and the more complex course track in MikroTik. Actually, it is the one and only advanced course between all MikroTik courses and it requires as a pre-requisite the MTCNA course as well as MTCRE course.
-
-
As being a complex course, we decided to design this course in which we explain all topics of the MTCINE track. In this course, we will explain and do LABS about the Border Gateway Protocol (BGP) and Multiple Protocol Label Switching (MPLS) which are both considered very advanced topics and implemented inside the networks of the Internet Service Provider (ISP).
The MTCNA training is included the following:
-
Module 1 border gateway protocol BGP.
-
Module 2 multiprotocol label switch.
-
Module 3 traffic engineering TE.
Requirements;
-
Basic networking knowledge.
-
Basic TCP/IP protocol knowledge.
-
Knowledge about Interior routing protocol such as RIP and OSPF.
First, Engineers and students who wants to learn how to configure BGP
routing.
protocol on MikroTik routers.
Engineers who work in Internet Service Provider using MikroTik Routers
and want to deploy MPLS.
Students who want to be prepared for the MikroTik MTCINE exam.
For more information:
https://i.mt.lv/cdn/training_pdf/mtcine_outline_2020154114220.pdf
-
MikroTik MTCUME – Certified User Management Engineer Training Course
-
Module 5 IPSec
-
Module 6 HotSpot
-
Module 7 RADIUS
MikroTik User Management is a very demanding topic in the networking industry especially if you work on MikroTik products.
As result, we designed this course to help you understand all topics that comes inside the User Management and to make you ready for the MikroTik MTCUME exam.
In addition, In this course we are going to go in details about the User Management topics and will apply real LABS to show you step-by-step how you can do the configuration.
The MTCNA training is included the following:
-
Module 1 PPP
-
Module 2 PPTP/L2TP
-
Module 3 PPPoE
-
Module 4 PPP Bridging.
MikroTik MTCINE is the hardest and the more complex course track in MikroTik. Actually it is the one and only advanced course between all MikroTik courses and it requires as a pre-requisite the MTCNA course as well as MTCRE course.
As being a complex course, we decided to design this course in which we explain all topics of the MTCINE track. In this course, we will explain and do LABS about the Border Gateway Protocol (BGP) and Multiple Protocol Label Switching (MPLS) which are both considered very advanced topics and implemented inside the networks of the Internet Service Provider (ISP).
Requirements;
-
Preferably has MikroTik MTCNA level.
-
Has basic networking and TCP/IP knowledge.
Therefore, engineers who wish to become MikroTik User Management professional to
be able to configure topics of this course in their networks.
As well, Students and engineer who are wishing to prepare for the MikroTik
MTCUME exam.
For more information:
https://i.mt.lv/cdn/training_pdf/mtcume_outline_2019181161836.pdf
-
Certified Security Engineer Training Course:
As a network engineer, you have always a concern to protect your network from outside cyber attacks. This is most of the the time a challenge when it comes to deploy a security plan to your network.
Firstly, MikroTik has an extensive firewall feature that can protect your network from all different types of Cyber attacks. As result, The goal of this course is to show you all different steps using real LAB scenarios of how to protect your MikroTik router(s) from any type of cyber attacks and do not let hackers to compromise your network.
Secondly, This course is based on the MikroTik MTCSE syllabus. So by taking this course, you will cover all the topics of the MikroTik MTCSE track and you will be ready for the exam.
In addtion, this course, we will issue cyber attacks to MikroTik router to see what are the weaknesses available on the router and then show you how you can protect it. All the course will be based on Hands-on LABS that you can re-do them yourself after following this course.
Finally, In this course, we will discuss about all security concerns in MikroTik and how to protect your router(s).
-
SYN flood mitigation.
-
RouterOS default configuration.
-
Best practices for management access.
-
Detecting an attack to critical infrastructure services.
-
Bridge filter.
-
Advanced options in firewall filter.
Most important is, 26 examples of the topics that will be explained are:
-
Attacks, mechanisms and services.
-
The most common threats.
-
RouterOS security deployment.
-
Packet flow, firewall chains.
-
Stateful firewall.
-
RAW table.
-
Public key infrastructure (PKI).
-
Port knocking.
-
FTP, telnet and SSH brute-force attacks and prevention.
-
Port scan detection and prevention.
-
Introduction to cryptography and terminology.
-
Encryption methods.
-
Algorithms – symmetric, asymmetric.
-
Secure connections (HTTPS, SSH, WinBox).
-
ICMP filtering
-
MNDP attacks and prevention.
-
DHCP: rogue servers, starvation attacks and prevention.
-
TCP SYN attacks and prevention.
-
UDP attacks and prevention.
-
ICMP Smurf attacks and prevention.
-
Default ports for the services.S
-
As Well, of all those security topics, there is one module which explain about the VPN tunneling and will contain the following topics:
-
Introduction to IPsec.
• L2TP + IPsec.
• SSTP with certificates. -
In addition of all those security topics, there is one module which explain about the VPN tunneling and will contain the following topics:
-
Introduction to IPsec
• L2TP + IPsec
• SSTP with certificates
Requirements;
-
Have at least MikroTik MTCNA level.
-
Understand basic networking topics such as TCP/IP, OSI Layer, etc .
-
Have a good knowledge in MikroTik .
Most Important is, this course is ideal for Network engineers, technicians and students wanting to deploy and secure MikroTik device based networks. The content of this course is very rich and it has a lot of hands-on LABs so you are more familiar about the types of attacks and how to protect your MikroTik routers from them.
-
For more information :
-
https://i.mt.lv/cdn/training_pdf/mtcse_outline_2019181161836.pdf
-
Certified Security Engineer Training Course:
First, A comprehensive course on IPv6, including an introduction to the protocol and its differences to IPv4. A deep-dive will cover how IPv6 and its constituent parts function and interoperate. Second, the theory will be complemented by hands-on labs using and configuring IPv6 in MikroTik’s RouterOS.
In addition, Designed for all network engineers and technicians wanting to deploy IPv6-based networks in enterprise and broadband environments. By the end of this training session, delegates will be familiar with IPv6 protocol and be capable to implement IPv6 network.
In conclusion, due to the IPv4 address deficit, administrators are increasingly implementing IPv6 addressing in their networks. At the MTCIPv6E training, participants will learn how to work with IPv6 addresses: create entries in routing tables. Also, configure a firewall, assign addresses for end devices, set up secure connections (VPN) between company branches. After that, The concept of migration from IPv4 to IPv6 available to users of the RouterOS system will be presented.
Most Important, During training students will learn about:
-
Introduction to IPv6 protocol.
-
IPv6 routing basics.
-
IPv6 autoconfiguration (stateless (SLAAC, DHCP), statefull (DHCP)).
-
Address configuration in IPv6.
-
IPv6 security.
-
Transision Mechanisms (DualStack, 6to4, 6RD, Teredo, DS-Lite).
Requirements;
-
Have a minimum MTCNA knowledge.
-
Be familiar with the TCP/IP protol and the OSI model.
-
Have a basic experience with MikroTik.
-
For more information
-
https://i.mt.lv/cdn/training_pdf/mtcipv6e_outline_2019181161836.pdf